Introduction to Accurate Siding Measurements
When it comes to enhancing the exterior of your home, siding plays a pivotal role. Not only does it protect your home from the weather, mold, dry rot and moisture, but it also adds to its aesthetic appeal. At KV Construction LLC, we understand the importance of precise measurements in siding replacement. This article delves into the meticulous process of measuring for siding, ensuring that homeowners and siding contractors in Bellevue WA alike can approach this task with confidence.
Step-by-Step Process for Measuring Siding
1. Detailed Sketching: The Foundation of Measurement
The first step in the siding measurement process involves creating a detailed sketch of your home. This sketch should encompass all sides of the building, paying close attention to unique architectural features. By doing so, you ensure that every aspect of the house is considered, from the front facade to the intricate details on the backside. This comprehensive approach is crucial for accurate measurement and effective planning.
2. Measuring Rectangular Walls: The Basics
Begin by focusing on the rectangular walls, as they are the simplest to measure. Measure the length and width of each wall, then multiply these dimensions to find the total square area. Remember, siding is typically sold in squares, so it’s essential to convert these measurements accordingly. For walls with different materials like fiber cement and cedar, separate calculations are necessary to ensure precision.
3. Gables and Dormers: Advanced Calculations
Measuring gables requires attention to both height and width. Multiply these dimensions to find the area, then apply a factor of 7.5 for accurate siding measurement. Dormers are similarly measured, with their area multiplied by 1.5. These calculations are vital for determining the total number of siding squares needed.
4. Accessory Estimation: The Finishing Touches
Don’t overlook the importance of accessories in siding installation. Plan for corner posts, starter strips, and J-channels, ensuring that each element is accounted for. Measure the base of all walls for starter strips and consider the need for Z-flashing where siding meets brick. J-channels are essential around windows and doors, and don’t forget the drop cap measurements above these openings.
Siding Contractors Bellevue WA KV construction Conclusion:
In conclusion, accurate siding measurement is a meticulous but essential process. Whether you’re a seasoned home siding contractor in Bellevue or a homeowner embarking on a DIY project, these steps will guide you towards a successful installation. Remember, precision in measurement is the key to a flawless finish. For those seeking professional assistance of a local, licensed, and Washington state registered siding contractor, KV Construction LLC stands ready to provide expert guidance and support.