This Bellingham exterior project combined installation of 23 windows and five doors with a customized Smooth James Hardie lap pattern, distinctive window head trim, extensive flashing, clear cedar soffits, belly bands, and HardiePanel beam and column accents.
The scope includes 23 windows, two sliding doors, two single doors, and a front door. Lower openings received flexible DuPont Tyvek tape and black QUAD MAX; James Hardie tape covers sides and tops, with 1/16-inch shims noted under bottom window flanges.
Smooth Hardie 5/4×4 trims window bottoms/sides, and 2×4 Smooth Hardie Artisan creates window heads.
Smooth cedar 2×2 inside corners and cedar light blocks add warm details; Smooth Hardie 5/4×4 addresses outside corners. Step flashing was installed between siding seams and primed Z-flashing at windows, exterior blocks, and deck.
Smooth Hardie 5/4×10 belly bands occur on middle-wall areas where possible and on gables. The front column is wrapped; clear cedar 1×4 T&G finishes large/small front soffits and three rear soffits. HardiePanels wrap beams with aluminum H-channels and Smooth 1×4 caps.
This CASE documents 23 windows, five doors, custom mixed-reveal lap, cedar soffits and HardiePanel beam wraps. The project demonstrates how specific exterior materials, opening details, siding profiles, and finishes can be coordinated with the rainy conditions common around Bellingham. KV Construction uses owner-managed project oversight and a consistent crew approach on its larger siding and exterior work.
If your Bellingham property needs a complete siding replacement or a larger James Hardie exterior project, request a free siding consultation with KV Construction. Discuss the existing wall conditions, appropriate cladding, moisture-management details, and the practical scope before work begins.