Bellingham Smooth Hardie Siding With 23 Windows, 5 Doors and Cedar Soffits

This Bellingham exterior project combined installation of 23 windows and five doors with a customized Smooth James Hardie lap pattern, distinctive window head trim, extensive flashing, clear cedar soffits, belly bands, and HardiePanel beam and column accents.

Bellingham exterior siding project by KV Construction
Bellingham Smooth Hardie Siding With 23 Windows, 5 Doors and Cedar Soffits

23 Windows and Five Doors

The scope includes 23 windows, two sliding doors, two single doors, and a front door. Lower openings received flexible DuPont Tyvek tape and black QUAD MAX; James Hardie tape covers sides and tops, with 1/16-inch shims noted under bottom window flanges.

Smooth Hardie Trim and Custom Reveals

Smooth Hardie 5/4×4 trims window bottoms/sides, and 2×4 Smooth Hardie Artisan creates window heads.

Cedar Accents and Wall Details

Smooth cedar 2×2 inside corners and cedar light blocks add warm details; Smooth Hardie 5/4×4 addresses outside corners. Step flashing was installed between siding seams and primed Z-flashing at windows, exterior blocks, and deck.

Architectural Wraps and Soffits

Smooth Hardie 5/4×10 belly bands occur on middle-wall areas where possible and on gables. The front column is wrapped; clear cedar 1×4 T&G finishes large/small front soffits and three rear soffits. HardiePanels wrap beams with aluminum H-channels and Smooth 1×4 caps.

Project Outcome

This CASE documents 23 windows, five doors, custom mixed-reveal lap, cedar soffits and HardiePanel beam wraps. The project demonstrates how specific exterior materials, opening details, siding profiles, and finishes can be coordinated with the rainy conditions common around Bellingham. KV Construction uses owner-managed project oversight and a consistent crew approach on its larger siding and exterior work.

Facebook
Email
Pinterest

Project Specifications And Materials

  • Openings: 23 windows; 2 sliding, 2 single, 1 front door (5 total)
  • WRB: HardieWrap
  • Window Lower Tape: Flexible DuPont Tyvek; black QUAD MAX at opening
  • Window Top/Sides: James Hardie tape; 1/16-inch bottom flange shims
  • Window Trim: Smooth Hardie 5/4x4 bottom/sides; Smooth Artisan 2x4 top
  • Corners: Smooth Hardie 5/4x4 outside; clear cedar 2x2 inside
  • Fixture Blocks: Smooth cedar light blocks
  • Lap: 2 x 8 1/4-inch at 7-inch reveal + 1 narrower board at 4-inch reveal (source says 5 1/5; verify)
  • Seams: Step flashing
  • Z-Flashing: Window trims, blocks and deck
  • Belly Bands: Smooth Hardie 5/4x10 on middle wall where possible and gables
  • Column: Front wrap
  • Soffit: Clear cedar 1x4 T&G at two front and three back areas
  • Beams: HardiePanel wraps, aluminum H-channel seams, Smooth 1x4 top
  • Sealant: QUAD MAX
  • Painting: Not specified

Request a Free Siding Consultation

If your Bellingham property needs a complete siding replacement or a larger James Hardie exterior project, request a free siding consultation with KV Construction. Discuss the existing wall conditions, appropriate cladding, moisture-management details, and the practical scope before work begins.

Bellingham project detail: cedar accents and wall details
Cedar Accents and Wall Details on Bellingham exterior project