This Custer, Whatcom County project replaced old siding and building paper with new HardieWrap and 8 1/4-inch ColorPlus lap siding at a 7-inch reveal. The scope is distinguished by the window tape sequencing, ColorPlus trim and utility blocks, white/color-matched Z-flashing, galvanized step flashing at siding joints, QUAD MAX, and Sherwin-Williams SuperPaint at eaves and fascia.
Both old siding and the old paper were removed before new HardieWrap was installed. Four-inch James Hardie tape is specified around windows.
Bottom and side tapes were installed over window flanges and paper; the top tape was placed over the upper flange and plywood before paper covered the top transition. This sequencing is source-documented and is the case’s most valuable moisture-management detail.
The source includes 5/4×4 and 5/4×3 ColorPlus outside corners, W-metal inside corners, and 5/4×4 ColorPlus window trim only where siding was replaced. It also specifies ColorPlus 7×10 light blocks, water blocks, and heating blocks.
ColorPlus metal Z-flashing protects documented window trims and blocks. Galvanized ColorPlus step flashing occurs at all specified lap seams. QUAD MAX 5X finishes joints, and Sherwin-Williams SuperPaint was applied to soffits, eaves and fascia.
This CASE documents documented bottom-side-top window tape sequencing and ColorPlus blocks. The project demonstrates how specific exterior materials, opening details, siding profiles, and finishes can be coordinated with the rainy conditions common around Custer. KV Construction uses owner-managed project oversight and a consistent crew approach on its larger siding and exterior work.
If your Custer property needs a complete siding replacement or a larger James Hardie exterior project, request a free siding consultation with KV Construction. Discuss the existing wall conditions, appropriate cladding, moisture-management details, and the practical scope before work begins.