KV Construction replaced old siding on this Bothell exterior with factory-finished Arctic White James Hardie ColorPlus lap siding. Behind the finished finish are HardieWrap, HardieTape, four-inch HardieFlash around windows and doors, 26GA window head and additional flashing, Arctic White Rustic Hardie trim, matching white metal corners, pre-painted fixture blocks, and white Z-flashing.
The crew removed old siding before installing HardieWrap and HardieTape sealing tape. This is the documented layer behind the factory-finished lap siding.
Four-inch HardieFlash was installed around windows and doors, with 26GA window head flashing. Additional white 26GA metal and Z-flashing were specified at windows and mounting blocks.
Arctic White Rustic Hardie 5/4×4 material was used at windows, doors, and outside corners. White 26GA W-metal forms inside corners. Hardie 7×10 light blocks plus outlet and water-service blocks were supplied pre-painted.
This CASE documents factory-finished Arctic White and complete HardieWrap/HardieFlash/26GA transitions. The project demonstrates how specific exterior materials, opening details, siding profiles, and finishes can be coordinated with the rainy conditions common around Bothell. KV Construction uses owner-managed project oversight and a consistent crew approach on its larger siding and exterior work.
If your Bothell property needs a complete siding replacement or a larger James Hardie exterior project, request a free siding consultation with KV Construction. Discuss the existing wall conditions, appropriate cladding, moisture-management details, and the practical scope before work begins.
